Axis 0451-001 EOL P8513 Network Camera White 0451-001

Axis P8513 User Manual - Page 30

For 0451-001 EOL.

PDF File Manual, 43 pages, Read Online | Download pdf file

0451-001 EOL photo
Loading ...
Loading ...
Loading ...
30
AXIS P85 Series - System Options
About
Here you can find basic information about your network camera. You can also view third party software licenses.
Resetting to Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described
in Maintenance, on page 28) or use the Control button on the side of the camera (see page 5) as described below:
Using the Control Button
Reset the camera to the factory default settings using the Control Button:
1. Remove the camera from the pipe by loosening the screw and gently pulling the camera unit out of the pipe.
2. Disconnect the network cable.
3. Press and hold the Control button while reconnecting power.
4. Keep the Control button pressed until the Status indicator color changes to amber (this may take up to 15 seconds).
5. Release the Control button.
6. When the Status indicator changes to green (which may take up to 1 minute), the process is complete and the camera
has been reset. The unit now has the default IP address 192.168.0.90
Note:
For other methods of setting the IP address, please refer to the product’s Installation Guide that accompanies the
product, or download a copy from www.axis.com
Loading ...
Loading ...
Loading ...