Loading ...
Loading ...
Loading ...
Network Camera User Manual
92
7.2.6 HTTPS Settings
Purpose:
HTTPS provides authentication of the web site and its associated web server, which
protects against Man-in-the-middle attacks.
Note:
For the camera that supports plug-in free live view, when you use HTTPS to visit
the camera, you should enable Websockets for live view. Go to Configuration >
Network > Advanced Settings > Network Service.
If HTTPS is enabled by default, the camera creates an unsigned certificate
automatically. When you visit the camera via HTTPS, the web browser will send a
notification about the certificate issue. Install a signed-certificate to the camera to
cancel the notification.
Steps:
1. Enter the HTTPS settings interface. Configuration > Network > Advanced Settings >
HTTPS.
2. Check Enable to access the camera via HTTP or HTTPS protocol.
3. Check Enable HTTPS Browsing to access the camera only via HTTPS protocol.
HTTPS Configuration Interface
4. Select the Server Certificate.
5. Click the Save to save the settings.
Note: If the function is abnormal, check if the selected certificate is abnormal in
Certificate Management.
Loading ...
Loading ...
Loading ...