Loading ...
Loading ...
Loading ...
12 C6659M (10/21)
Figure 4. Connect the iCS Lens Cable to the Connector
d. (Optional) Insert a Micro SD Card into the slot. NOTE: Do not remove the microSD card when the
camera is powered on.
Figure 5. Insert a Micro SD Card
2. Install the camera on the mount in the desired location (refer to the installation/operations manual for
the recommended mount). The camera can be attached to the mount from either
the top or bottom
threaded 1/4-20 threaded mounting hole, depending on the type of camera mount used in your
installation.
3. Connect the cables to the camera. Refer to the Connecting the Cables section for wiring instructions and
the Product Overview for connector port locations.
4. Apply power to the camera. The camera will complete a configuration sequence. The Status LED
Indicators located on the front and back can be used to identify the stage the camera is at in it’s
configuration.
5. Refer to
Accessing the Camera section to view the camera image.
6. the camera field of view is set by adjusting zoom and focus via the Web UI. Refer to the operations
manual.
CONNECTING THE CABLES
The I/O interfaces appear on the back of the camera module (Refer to Figure 1). Make the appropriate
connections.
Loading ...
Loading ...
Loading ...