Loading ...
Loading ...
Loading ...
Handset advice
Operating distance
The handset will only operate in the same room as the
cooker and up to a maximum distance of 4 metres from
the appliance. If out of recommended operating range,
the handset may show ‘Standby’. If this happens move
the handset back to within the recommended distance
and it should correct itself, see below.
Handset to AGA eR7 Signal Check
The (Standby) symbol is shown when in the
following situations;
1. Standby mode
2. Communications fail
3. A power cut
4. Handset is out of range of the AGA eR7 cooker
When transferring information from or to the controller
always operate the handset in front of the cooker, this
gives the strongest signal.
If the handset shows
Standby, when the cooker is
on, press the button rmly for 1 second, this will
activate the communication link between the cooker
and handset.
Communication/Handshake
For details on initial Communication/Handshake, see
“Communication/handshake” page 25.
Preview Mode
If the handset is out of range of the cooker or if
the appliance is switched o, Preview only mode is
available. Changes cannot be made to the programmed
events. The
symbol is displayed in the screen and
the message ‘Preview only’ is displayed briey when the
events programme screen is rst entered.
When in Preview Mode you can review the days by
using the
and buttons. The and buttons
become inactive and you cannot make any changes.
Handset Failure
In the unlikely event of handset failure, the appliance
would still be operational with the last selected
programme. The cooker can also be changed to
Manual mode from one of the auto modes using the
mode button on the control panel. If the handset is
damaged or lost, a replacement can be obtained from
AGA and re-programmed to suit your appliance.
DO NOT PLACE THE HANDSET ON ANY HOT
SURFACES.
24
Loading ...
Loading ...
Loading ...