Loading ...
Loading ...
Loading ...
Generator Shut Down
1. Shut off all loads and unplug electrical loads from generator panel receptacles.
2. Let engine run at no-load for several minutes to stabilize internal temperatures
of engine and generator.
3. Move ON/OFF switch to OFF.
4. Close fuel valve.
NOTE: Under normal conditions, close fuel valve and allow generator to run
carburetor bowl out of fuel. For emergencies, switch to STOP.
VFT meter
The VFT meter can be used for displaying voltage, frequency(hertz),run time and
total run time as applicable. (Display mode depends on the configuration). The
LCD displays each mode by pressing the button below the display.
The display meter sets as either automatic switching mode or manual operation
mode. In the manual state press MODE BUTTON for mode switching. But in
automatic mode MODE BUTTON is used for reset (operate cautiously when
necessary).
Function Indicator
The OIL ALARM will illuminate when the generator is low oil level.
The OVERLOAD ALARM will illuminate when the generator is over load.
The OUTPUT INDICATOR lamp will illuminate when the generator run steadily.
3
OFF
Wait a few min..
2
1
OFF
4
20
Loading ...
Loading ...
Loading ...