Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
84
Pay Rate
Set corresponding pay rates for three overtime levels, which can be generally used to
calculate total work hours.
Overtime Rule for Non-Workday
You can enable overtime rule for non-workday and set calculation mode.
4. Click Save.
Configure Attendance Check Point
You can set the card reader(s) of the access point as the attendance check point, so that the
authentication on the card readers will be recorded for attendance .
Before You Start
You should add access control device before configuring attendance check point. For details, refer
to Add Device.
Steps
Note
By default, all card readers of the added access control devices are set as attendance
checkpoint.
1. Enter the Time & Attendance module.
2. Click Attendance Settings → Attendance Check Point to enter the Attendance Check Point
Settings page.
3. Optional: Set Set All Card Readers as Check Points switch to off.
Only the card readers in the list will be set as the attendance check points.
4. Check the desired card reader(s) in the device list as attendance check point(s).
5. Set check point function as Start/End-Work, Start-Work or End-Work.
6. Click Set as Check Point.
The configured attendance check point displays on the right list.
Configure Holiday
You can add the holiday during which the check-in or check-out will not be recorded.
Add Regular Holiday
You can configure a holiday which will take effect annually on regular days during the effective
period, such as New Year's Day, Independence Day, Christmas Day, etc.
Steps
1. Enter the Time & Attendance module.
2. Click Attendance Settings → Holiday to enter the Holiday Settings page.
3. Check Regular Holiday as holiday type.
Loading ...
Loading ...
Loading ...