Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
49
Note
Enter the person's basic information first. For details about configuring person's basic
information, refer to Configure Basic Information.
3. In the Credential → Fingerprint panel, click +.
4. In the pop-up window, select the collection mode as Remote.
5. Select an access control device which supports fingerprint recognition function from the drop-
down list.
6. Collect the fingerprint.
1) Click Start.
2) Place and lift your fingerprint on the fingerprint scanner of the selected access control device
to collect the fingerprint.
3) Click Add to save the recorded fingerprint.
7. Confirm to add the person.
– Click Add to add the person and close the Add Person window.
– Click Add and New to add the person and continue to add other persons .
6.2.6 Configure Access Control Information
When adding a person, you can set her/his access control properties, such as setting the person as
visitor or as blocklist person, or as super user who has super authorization.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person and click Add.
Note
Enter the person's basic information first. For details about configuring person's basic
information, refer to Configure Basic Information.
3. In the Access Control panel, set the person's access control properties.
PIN Code
The PIN code must be used after card or fingerprint when accessing. It cannot be used
independently. It should contain 4 to 8 digits.
Super User
If the person is set as a super user, he/she will have authorization to access all the
doors/floors and will be exempted from remaining closed restrictions, all anti-passback rules,
and first person authorization.
Extended Door Open Time
When the person accessing door, grant this person more time to pass through doors which
have been configured with extended open duration. Use this function for the persons with
Loading ...
Loading ...
Loading ...