Loading ...
Loading ...
Loading ...
LED on the battery Cause Solution
The error LED flash-
es.
The battery is weak. Charge the battery. Refer to
To charge the
battery on page 13
.
The temperature in the work en-
vironment is too high or too low.
Use the battery in temperatures between
-10°C and 40°C.
Overvoltage. Make sure that the mains voltage is the
same as on the rating plate on the product.
Remove the battery from the battery charg-
er. Wait 5 seconds and try again to charge
the battery. If the problem continues, speak
to an approved service agent.
The error LED is on. The cell difference too much
(1V).
Speak to an approved service agent.
Battery charger
LED on the bat-
tery charger
Cause Solution
The error LED
flashes.
The temperature in the work
environment is too high or
too low.
Use the battery charger in temperatures between
5°C and 40°C.
The error LED is
on.
Speak to an approved service agent.
Control panel
If you cannot find a solution to the problem,
speak to your Husqvarna service agent.
22
1840 - 005 - 11.07.2023
Loading ...
Loading ...
Loading ...