Philips DVDR80/051 Operating Instructions

Loading ...

Continue set;up

Setup Home

Press Aor Bto select. Then press OK to confirm.

Setup

Choose item to set up :

Language English

Country United Kingdom

Postal code XXXXX

External receiver 1 None

External receiver 2 None

External receiver 3 None

1 Check the settings shown on the screen.

If the settings are not correct, choose the line in which you want to

change the settings and confirm with OK .

2 Press the green function button to leave the screen.

3 If you want to view a demonstration of the GUIDE Plus+

system

select 'View Demo' with P- B and confirm with OK .

If you start the demo, programmed recordings can be deleted.

If you do not want to see a precentation of the GUIDE Plus+

system,

end using GUIDE/TV .

4 This completes the set-up process for the GUIDE Plus+

system.

Leave the DVD recorder switched off with the STANDBY m button (preferrably during the

night) to load the GUIDE Plus+

data.

The information will be available in the next 24 hours.

What must I pay attention to when installing an external receiver

for the first time?

•) The receiver must be switched on.

•) If you can switch between 'TV' and 'Radio' on the receiver, select 'TV'.

•) Select the TV channel that transmits the GUIDE Plus+

data on the

receiver. You will find the corresponding TV channel for your country in the

table in section 'General Information' in chapter 'The GUIDE Plus+ System'.

•) On the DVD recorder, select the programme number of the input socket

to which the external receiver is connected:

'EXT2' Scart socket at the back of the DVD recorder EXT 2 AUX-I/O

'CAM1' S-Video/Video front sockets S-VIDEO / VIDEO

'EXT1' Scart socket at the back of the DVD recorder EXT 1 TO TV-I/O

•) If the external receiver is only connected to the aerial socket, you must

select the programme number on the DVD recorder under which the

external receiver is stored.

•) The DVD recorder must be switched on.

•) If GUIDE Plus+

data were loaded, switch the DVD-Recorder off with the

STANDBY m button for approx.10 minutes. During this time, the data will

be stored in a memory to prevent them from being erased in case of

malfunction (power failure).

You must observe this information only when installing the receiver for the

first time. At this point, there is no GUIDE Plus+

data available yet in order

to automatically detect the TV channel that delivers the GUIDE Plus+

data.

Tip

ENGLISH

The GUIDE Plus+® System

Loading ...

Philips DVDR80/051 DVD Player

Operating Instructions - Page 53