Loading ...
Loading ...
Loading ...
11
EN
Fridge door flush with the cabinetry
Side clearance must be 153mm either side
of the fridge, to have the fridge doors siting
flush with the kitchen cabinetry.
Minimum cabinetry opening
(WxDxH) : 1215mm x 784mm x 1807mm
Note : Top gap all 25 mm.
Space required
Total width (W) mm 913
Total depth (D) mm 749
Maximum height (H) mm 1782
Cabinet width (W1) mm 908
Cabinet depth (D1) mm 625
Depth door open 90° (D2) mm 1189
Door opening
Your refrigerator should be positioned
to allow easy access to a counter when
removing food. For best use of refrigerator
drawers and freezer baskets, the refrigerator
should be in a position where both can be
fully opened.
CAUTION
LED lighting
Your appliance is fitted with long life LED
lighting. In the unlikely event the LED lights
should fail, then the LED lights should be
serviced by the service agent, to avoid a
safety hazard. Refer to the warranty page for
contact details.
Cabinet Leveling & Refrigerator Door
Alignment (if necessary
• All four corners of the cabinet must rest
firmly on the floor
• The front should be slightly elevated to
ensure that doors close and seal properly.
• Doors should align with each other and be
level.
Most of these conditions can be met by
raising or lowering the adjustable front
rollers.
To level the cabinet using the front rollers:
1. Lower anti-tip legs until they are both
touching the floor. Use a pair of pliers to
adjust.
To raise: turn leg clockwise.
To lower: turn leg counterclockwise.
2. Ensure both doors are bind-free with their
seals touching the cabinet on all four sides
and that cabinet is stable.
To make final door height adjustments:
1. Insert Electrolux 10mm wrench into the
shaft of the lower hinge.
2. To lower door: turn adjustment screw
clockwise.
To raise door: turn adjustment screw
counterclockwise.
Anti-Tip
Legs
153mm
35
mm
153mm
Door
Door
Loading ...
Loading ...
Loading ...