Loading ...
Loading ...
Loading ...
10 www.westinghouse.com.au
4. INSTALLING YOUR NEW APPLIANCE
Unpacking
ENVIRONMENT
Most of the packing materials are
recyclable. Please dispose of those
materials through your local recycling
depot or by placing them in
appropriate collection containers.
Important – check for any damages or
marks. If you find the refrigerator is damaged
or marked, you must report it within 7 days
should you wish to claim for damage/marks
under the manufacturers warranty. This does
not aect your statutory rights.
Clean your refrigerator thoroughly following
the instructions in the “Cleaning” section
and wipe o any dust that has accumulated
during shipping.
Locating the refrigerator
CAUTION
Automatic aerosol systems (such as
insect control) should not be located
adjacent to the product as the spray
may cause long term damage to the
external plastics of the appliance.
Do not put the refrigerator in a location that
is too cold or is unprotected, for example in
a garage or on a veranda. The ambient
temperature should be above 10°C.
Put the refrigerator in a dry place avoiding
areas of high moisture or humidity.
Ensure the refrigerator is located on an even
surface.
Adequate ventilation around your
refrigerator
The diagram below shows the recommened
airspace to allow for ventilation of your
refrigerator.
Installing your refrigerator
Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
When positioned in a corner area, spacing
of right side at least 255 mm and left
side at least 345 mm on the hinge side will
allow the doors to open enough to enable
the removal of bins and shelves.
Note: If your refrigerator is placed with the door
hinge side against a wall, you may have to allow
additional space so the door can be opened wider.
Installation options for optimal aesthetics :
Minimum side clearance kitchen cabinet
Fridge must sit 50mm proud of kitchen
cabinetry.
Minimum cabinetry opening
(WxDxH) : 928mm x 613mm x 1807mm
Front of fridge body in line with kitchen
cabinet
Side clearance must be 72mm either side of
fridge body, to have the fridge doors siting
proud of the kitchen cabinetry.
Minimum cabinetry opening
(WxDxH) : 1052mm x 663mm x 1807mm
W
H
D1
D2
D
W1
345
mm255mm
120° 120°
90°
50mm
35
mm
10mm 10mm
72mm
35mm
72mm
Loading ...
Loading ...
Loading ...