Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION COMMERCIAL 12” BRUSH CUTTER — BCX4500/BCX4500-FC34
REPLACE THE 3-TOOTH BLADE
WITH THE STRING TRIMMER
HEAD (EGO KIT AH3810, SOLD
SEPARATELY)
Familiarize yourself with the cutter head
by referring to Fig. 10a.
Follow the steps below to remove the
3-tooth blade and mount the trimmer
head.
1. Disconnect the battery pack.
2. Rotate the outer flange to align the
slot in the inner flange with the
shaft-locking hole in the gear case
and insert the included hex key
into the aligned holes to act as a
stabilizer.
3. Wear gloves. Position the gear case
against a solid surface for support.
Use one hand to grasp the blade
and the other hand to loosen the
nut in the direction of the arrow
marked on the outer flange, using
the included multi-function wrench.
Remove the 3-tooth blade, nut and
the outer flange and save them for
reassembly (Fig. 10b &10c).
10a
Nut
Outer Flange
3-tooth Blade
Flange Cover
Inner Flange
Motor Shaft
Slot in the
Inner FLange
10b
10c
Nut
Outer Flange
Inner Flange
Bulge
Loading ...
Loading ...
Loading ...