Loading ...
Loading ...
Loading ...
These models feature an ultra-low noise Line input via an XLR/¼˝ TRS combo jack. Use this in-
put when you wish to hook up an additional stereo signal source: mixers, keyboards, electronic
drums, CD players, DVD music players, MP3 players, etc.
1. Make sure the Power switch is in the OFF position.
2. Connect an external stereo signal source to the XLR input or the ¼˝ input. Never use
both at once.
3. Switch on the RPG BT V2 unit.
4. Refer to the “Setting Level Controls” section of this manual for instructions on how to
properly adjust the input level controls (gains).
Line Input
You can use the Aux input when you wish to hook up an additional stereo signal source
without the use of a mixer console. Smart phones, CD players, DVD music players, MP3
players etc. can be plugged directly in to the RCA jacks labeled AUX IN.
1. Make sure the RPG BT V2's power switch is in the OFF position.
2. Connect the music source unit to the RCA jacks marked AUX IN.
3. Use the push button (located next to RCA jacks) to select AUX input.
4. Switch ON your RPG BT V2.
5. Refer to the “Setting Level Controls” section of this manual for instructions on how to
properly adjust the input level controls (gains).
Aux Input
When setting up for larger venues, a mixing console becomes a critical piece of equipment
for appropriately mixing signals from multiple inputs such as singers, speakers, effects
devices, musicians and of course allows for multiple speaker utilization.
1. Make sure the RPG BT V2's power switch is in the OFF position.
2. Turn Master volume to 0 position.
3. Turn mic Level to 0 position.
4. Connect the LEFT SPEAKER OUTPUT of mixer to the Line In connection of your Left
RPG BT V2 unit Connect the RIGHT SPEAKER OUTPUT of mixer to the Line In
connection of your Right RPG BT V2 unit.
5. Switch ON your RPG BT V2 units.
6. Slowly raise the level of the mixer output to the 0dB level position.
7. Slowly turn the mic Level controls clock wise until the CLIP LED indicator begins
to blink, then turn it down slightly. This indicates the maximum input voltage gain is
matched and set properly.
8. Turn Master volume up to achieve proper volume.
Public Address/Concert Mixer
2
3
OFF
1
POWER
Loading ...
Loading ...
Loading ...