Loading ...
Loading ...
Your RPG BT V2 is set up to produce the full spectrum of sound from its woofer and
tweeter horn combination. The lower frequencies seek out the oor of the room they are
playing and travel along the oor and walls. The tweeter horn is more directional. Hence
when setting up your system its more important to make sure that the tweeter horns are
not blocked by any furniture and are located / aimed at ear level to the listening audience.
Woofer aiming is not as critical as explained previously due to the nature of the woofer
sounds able to travel through various paths even when blocked.
It is therefore recommended that when setting up your system you set up your speakers
on speaker stands, such as the Rockville model RVSS2 (not included) so that the tweeter
sounds will radiate above the listening crowd. This will guarantee optimum sound disper-
sion and achieve clear vocal sound reproduction.
The placement of your microphone is critical in avoiding feedback through your RPG BT
V2 speaker. Never set up your microphone in front of the speaker. Always set up your mi-
crophone behind the speaker. When approaching the speaker to make any adjustments,
we recommend approaching the speaker from the rear and not walking directly towards
the front of the speaker.
Your RPG BT V2 can be placed on the oor at an angle as a stage monitor. Unlike a PA
setup which face the crowd, stage monitors are set up to face the performer on stage and
to direct the sound towards them. This presents a particular problem as now feed back
may occur. To avoid stage monitor feedback the following precautions should be taken.
1. Choose a microphone with high directivity, i.e. cardioid or hyper-cardioid polar pattern.
2. Never point the microphone directly in front of the speaker. Holding the microphone in
a normal position will allow you to be closer to the stage monitor with out feedback.
Setting Up Your RPG BT V2 Professional Sound System
How To Avoid Irritating Feedback
Stage Monitor Setup
Loading ...
Loading ...
Loading ...