Loading ...
Loading ...
Loading ...
1. MP3 Player controls.
• Press Play button once to play track, press again to pause.
• Mode control switches between input modes: Bluetooth, USB, and SD/MMC
• Repeat button/TWS button: Press once to repeat single track, press again to repeat
all tracks, press once to turn off repeat mode. Press and hold for TWS mode.
• Previous/Next track buttons also serve to access folders on USB/SD input. For track
control quickly press buttons. For folder access press and hold buttons.
• Record button allows you to record input back to your USB drive or SD/MMC card.
2. IR remote sensor
3. USB and SD/MMC Card input
4. 5 band graphic equalizer. Adjust frequencies to +/-12dB
5. Digital delay effect (echo) control panel.
• The Repeat knob controls the rate of the delay.
• The Delay knob controls the time interval of the delay.
• The Level knob adjusts the mix level of the effect sound.
6. Master volume control knob.
7. Digital Effect and Level control knobs for Mic In port.
8. Combo XLR / ¼˝ Mic input port: The Mic In port is designed for balanced and unba-
lanced mic signals. When you use an unbalanced ¼˝ TS plug, the line input automati-
cally turns the ring into ground.
9. Digital Effect and Level control knobs for Line In port.
10. Combo XLR/ ¼˝ Line input port: The Line In port accepts signals from a variety of
sources such as keyboards, electronic drums, mixers, etc. When using an unbalanced
¼˝ TS plug, the line input automatically turns the ring into ground. Please do not plug
microphones into the line input as it will have poor sound quality. Use the Mic In port
for microphones. To use wireless mics connect them into the Line input of your mixer.
11. Auxiliary/MP3 input selector switch.
12. Pre-Amp RCA input/output jacks.
13. Auxiliary/MP3 input/output volume control.
14. Amplier Clip limit LED indicator and Power LED indicator.
15. Power switch
16. IEC AC power socket
17. XLR Line Out
18. Fuse compartment
19. Variable voltage selector switch (110v/220v)
Loading ...
Loading ...
Loading ...