Hikvision DS-K3G200LX User Manual

Loading ...

Figure 4-6 Card Reader Board

4.4.6 RS-485 Wiring

The RS-485 interfaces on the access control board and sub

oponal board are suggested to connect with the face

recognion module or the card reader. Here takes connecng

with a card reader as an example.

Note

•

If there are other RS-485 devices connecng, the ID of the

RS-485 cannot be conicted.

•

The connected 12 V power interface for the face recognion

terminal cannot be connected with other 12 V devices.

Figure 4-7 Wiring RS-485

4.4.7 RS-232 Wiring

Note

•

There is 1 RS-232 interface on the extended interface of access

control board, see Access Control Board Terminal Descripon

(Oponal). The RS-232A corresponds to UART 1 on web.

•

There is 1 RS-232 interface on the sub extended interface

board, see Sub

Oponal Board Terminal Descripon

(Oponal). The RS-232B corresponds to UART 2 on web.

The RS-232C interface is reserved.

Figure 4-8 RS-232 Wiring

4.4.8 Alarm Input Wiring

On the main lane control board, you can wire the re alarm input

interface.

Figure 4-9 Remaining Open

Loading ...

Hikvision DS-K3G200LX Value Tripod Turnstile