Loading ...
Loading ...
Loading ...
Warning
Terminal PE should connect to a ground wire to avoid hazard
when people touching the device.
Note
•
The cable bare part should be no more than 8 mm. If possible,
wear an insulaon cap at the end of the bare cable. Make sure
there's no bare copper or cable aer the wiring.
•
The Terminal L and the Terminal N cannot be wired reversely.
Do not wire the input and output terminal reversely.
•
To avoid people injury and device damage, when
tesng, the
ground resistance of the equipotenal points should not be
larger than 2 Ω。
4.3 Wiring
Scan the QR code to view the wiring guide video.
4.4 Terminal Descripon
4.4.1 Lane Control Board Terminal Descripon
The lane control board contains power input interface, exit
buon and re input interface, access control board interface,
debugging port, indicator interface, etc.
The picture displayed below is the lane control board diagram.
4.4.2 Access Control Board Terminal
Descripon
(Oponal)
Access control board is mainly used for authority idencaon in
places with high security levels such as public security or judicial
place, external device accessing, and
communicaon with the
upper
plaorm and lane controller.
5
Loading ...
Loading ...
Loading ...