Hikvision DS-2DF4220-DXS6/316LC User Manual

Loading ...

Note

The router should be the same one which your mobile phone has connected to.

Tap Add in the next interface to nish adding.

For detailed informaon, refer to the user manual of the Hik-Connect app.

9.8 Wi-Fi

Connect the device to wireless network by seng Wi-Fi parameters.

Note

This funcon is only supported by certain device models.

9.8.1 Connect Device to Wi-Fi

Before You Start

Refer to the user manual of wireless router or AP to set SSID, key, and other parameters.

Steps

Go to TCP/IP sengs page: Conguraon → Network → Basic Conguraon → TCP/IP .

Select Wlan to set the parameters. Refer to

TCP/IP for detailed conguraon.

Note

For stable use of Wi-Fi, it is not recommended to use DHCP.

Go to Wi-Fi sengs page: Conguraon → Network → Advanced Conguraon → Wi-Fi .

Set and save the parameters.

1) Click Search.

2) Select a SSID, which should be the same as that of wireless router or AP.

The parameters of the network is automacally shown in Wi-Fi.

3) Select the Network Mode as Manage.

4) Input the key to connect the wireless network. The key should be that of the wireless network

connecon you set on the router.

What to do next

Go to TCP/IP sengs page: Conguraon → Network → Basic Conguraon → TCP/IP , and click

Wlan to check the IPv4 Address and log in the device. See

Access Device via Web Browser for

detailed informaon.

9.9 Set ISUP

When the device is registered on ISUP plaorm (formerly called Ehome), you can visit and manage

the device, transmit data, and forward alarm informaon over public network.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DF4220-DXS6/316LC 4-inch 20x Explosion-proof Network Speed Dome