Hikvision DS-2DF4220-DXS6/316LC User Manual

Loading ...

Repeat above steps to set other lines.

10.

Set arming schedule. See Set Arming Schedule .

11.

Set linkage method. See Linkage Method Sengs .

7.2.5 Set Region Entrance Detecon

Region entrance detecon is used to detect the object movement of entering a predened area.

When it occurs, the device takes linkage acons as response.

Steps

Go to Conguraon → Event → Smart Event → Region Entrance Detecon .

Check Enable.

Oponal: Click Lock to lock PTZ control to prevent the interrupon from other PTZ related acon

during conguraon.

Normally, the PTZ control is automacally locked when you enter the conguraon interface.

You can manually resume the lock when the countdown is over.

Adjust the live image to the desired scene by using PTZ control buons.

Draw detecon area.

1) Select a Region No.. Up to 4 regions can be set.

2) Click Detecon Area.

3) Click on the live image to draw the boundaries of the detecon area, and right click to

complete drawing.

Oponal: Set the minimum size and the maximum size for the target to improve detecon

accuracy. Only targets whose size are between the maximum size and the minimum size trigger

the detecon.

1) Click Max. Size, and drag the mouse on live image. If you want to change the size, click the

buon and draw again.

2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the

buon and draw again.

Set detecon parameters.

Sensivity It stands for the sensivity of detecng an target. The higher the value is,

the more easily the target is detected.

Detecon

Target

You can specify the object type, and the device only detects the selected

type of objects.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DF4220-DXS6/316LC 4-inch 20x Explosion-proof Network Speed Dome