Hikvision DS-2DF4220-DXS6/316LC User Manual

Loading ...

Chapter 8 Arming Schedule and Alarm Linkage

Arming schedule is a customized me period in which the device performs certain tasks. Alarm

linkage is the response to the detected certain incident or target during the scheduled me.

8.1 Set Arming Schedule

Set the valid me of the device tasks.

Steps

Click Arming Schedule.

Drag the me bar to draw desired valid me.

Note

Up to 8 periods can be congured for one day.

Adjust the me period.

Click on the selected me period, and enter the desired value. Click Save.

Click on the selected me period. Drag the both ends to adjust the me period.

Click on the selected me period, and drag it on the me bar.

Oponal: Click Copy to... to copy the same sengs to other days.

Click Save.

8.2 Linkage Method Sengs

You can enable the linkage funcons when an event or alarm occurs.

8.2.1 Trigger Alarm Output

If the device has been connected to an alarm output device, and the alarm output No. has been

congured, the device sends alarm informaon to the connected alarm output device when an

alarm is triggered.

Steps

Note

This funcon is only supported by certain models.

Go to Conguraon → Event → Basic Event → Alarm Output .

Set alarm output parameters.

Automac Alarm For the informaon about the conguraon, see

Automac Alarm .

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DF4220-DXS6/316LC 4-inch 20x Explosion-proof Network Speed Dome