Loading ...
Loading ...
Loading ...
Changing Settings
EN-143
While holding down the “TONE” button, press the C{7 or D7 key.
Using the +/– Keys to Raise or Lower the Setting Value by 1 (operation type B)
• Setting value: 0 (silence) to 42 (maximum volume)
A separator tone sounds when the set value becomes a multiple of 10.
• Default value: 26
Fine-tune the relative pitch of the Upper2 part to the Upper1 part.
While holding down the “TONE” button, press the F7 or F{7 key.
Using the +/– Keys to Raise or Lower the Setting Value by 1 (operation type B)
• Setting value: –99 cents to +99 cents (100 cents = 1 semitone)
A separator tone sounds when the set value becomes a multiple of 10.
• Default value: 0 cents
Changing the settings of the Upper2 part
Adjust the volume of the Upper2 part
Key Setting
C{7 Lower the volume of the Upper2 part by one level (–)
D7 Increase the volume of the Upper2 part by one level (+)
C{7 + D7 Reset the volume of the Upper2 part to the default setting
Fine-tune the Upper2 part (Upper2 Detune)
Key Setting
F7 Lower the pitch of the Upper2 part by 1 cent (–)
F{7 Raise the pitch of the Upper2 part by 1 cent (+)
F7 + F{7 Sets the pitch of the Upper2 part to the same as the Upper1 part (default setting)
C1A0 C2 C3 C4 C5 C6 C7 C8
C{7D7
C1A0 C2 C3 C4 C5 C6 C7 C8
F7 F{7
Loading ...
Loading ...
Loading ...