Loading ...
Loading ...
Loading ...
Listening back to a Performance Immediately (Instant RePlayer)
EN-106
If you place a cue mark at the desired time during performance, you can start playback from the marked
position upon replay. You can add up to 36 marks (within270seconds), and specify from which mark
position to start replay.
Start performing.
• The “0(REC)” button blinks slowly to indicate that recording is in progress.
• When you turn on the power and use the Instant RePlayer for the first time, marks are
automatically added.
Touch the “0(REC)” button at the point you wish to cue a replay.
• The mark is added when the “0(REC)” button is touched.
• When you add a mark, recording will stop temporarily (the “0(REC)” button light will go out),
and recording begins (the “0(REC)” button blinks slowly) from the point at which the next
performance starts (key press or pedal operation).
1.
Stop playing, hold down the “a” button, and press a black key for mark
selection to specify the mark at which you wish to start replay.
Selecting a Setting Value Directly (operation type A)
• Replay starts from the specified mark position.
• For the black keys assigned to mark selection, see “Start mark and start seconds for Instant
RePlayer”.
2.
When the replay is over, start the next performance.
• When the next performance begins, a mark is automatically placed at that position.
• If you specify a mark that does not exist, the oldest mark is selected for replay.
Listen Back Using Marks
What is a Mark?
Performing
Adding Marks at Desired Points within Performances
Replaying from a Mark
C1A0 C2 C3 C4 C5 C6 C7 C8
Press any one of the black keys used for mark selection
Loading ...
Loading ...
Loading ...