12V PSU Module
DS-PM1-D
User Manual
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
English
Overview
1
Installaon
Specification
2
3
4
Compability AX PRO Panel
Input Voltage 8 to 24 VDC
Output Voltage 5.5 VDC
Input Current Up to 2A
Output Current Up to 2A
Operaon temperature -10 °C to +55 °C (-4 °F to +122 °F)
Operaon humidity 10% to 90% (No condensing)
Dimension ( W x H x D) 80 x 90 x 15mm
Weight 35 g
The PSU module is a power supply adapng board, which connects the AXPRO to 12 VDC power sources.
Before You Start
Make sure that the device is disconnected from the mains.
Follow the general safety rules when install the PSU.
1.Remove the mounng plate of the control panel.
2.Turn off the power buon of the device. Disconnect the power and Ethernet cables.
3.Loosen the screws and remove the back lid.
4.Remove the screws that fix the boards on the device body.
5.Remove the boards, and keep them in the same plane without disconnecng them.
6.Remove the original power supply unit (the smaller one) from the mainboard.
7.Connect the PSU to the mainboard by connecng the pin terminal.
8.Fix the boards and the control panel body with the screws loosened before.
9.Connect the power and Ethernet cable, and turn on the power switch.
UD23559B
Loading ...
