Loading ...
Loading ...
Loading ...
"Easy Clean" cleaning aid en
23
WARNING‒Risk of burns!
The cooking compartment gets very hot when the
cleaning function is in progress.
▶ Never open the appliance door.
▶ Allow the appliance to cool down.
▶ Keep children at a safe distance.
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶ Never touch the appliance door.
▶ Allow the appliance to cool down.
▶ Keep children at a safe distance.
Note:The oven light does not light up while the clean-
ing function is running.
Requirement:→"Preparing the appliance for the
cleaning function", Page22
1.
Press "Cleaning".
2.
Press "Pyrolytic self-cleaning"
.
3.
Press "Level" to set the cleaning setting.
Cleaning set-
ting
Cleaning
level
Duration in hours
1 Low Approx. 2:15
2 High Approx. 2:30
Select the higher cleaning setting if the cooking
compartment is particularly dirty or has not been
cleaned for a while.
You cannot change the duration of the cleaning
function.
Once the cleaning function is in progress, you can-
not change the cleaning setting.
a The duration of the cleaning setting will appear on
the display.
4.
Press
to start the cleaning function.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning func-
tion appears on the display.
5.
Press "OK" to confirm the notification.
a The cleaning function starts. The duration counts
down on the display.
a For your safety, the appliance door locks the cook-
ing compartment. appears on the display.
a Once the cleaning function has run through to the
end, an audible signal sounds.
6.
After using the cleaning function, prepare the appli-
ance for operation.
→"Preparing the appliance after the cleaning func-
tion", Page23
The appliance door will remain locked until the ap-
pliance has cooled down sufficiently and
has
gone out.
18.3 Cancelling the cleaning function
Note:You can no longer stop or change the cleaning
function once it has started.
▶
To cancel the cleaning function, press
to switch
the appliance off.
18.4 Preparing the appliance after the
cleaning function
1.
Allow the appliance to cool down.
2.
Wipe off any ash that has been left behind in the
cooking compartment, on the shelf supports and
around the appliance door with a damp cloth.
3.
Remove white residues with lemon juice.
Note:White residues on the enamel surfaces may
be caused by heavy soiling. These food residues
are harmless. The deposits do not compromise the
functionality of the appliance.
Note:While the cleaning function is running, the frame
on the inside of the appliance door or other parts of
the door that are made of stainless steel become dis-
coloured. This discolouration does not compromise the
functionality of the appliance. The discolouration can
be removed using a stainless steel cleaner.
19 "Easy Clean" cleaning aid
Use the "Easy Clean" cleaning aid for intermediate
cleaning of the cooking compartment. The "Easy
Clean" cleaning aid softens dirt by vaporising the
soapy water. It is then easier to remove the dirt.
19.1 Setting the "Easy Clean" cleaning aid
WARNING‒Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
▶ Never pour water into the cooking compartment
when the cooking compartment is hot.
Notes
¡ The oven light does not light up while the cleaning
aid is running.
¡ Do not open the appliance door while the appliance
is in operation.
Requirements
¡ You can only start the cleaning aid once the cooking
compartment is cold (room temperature) and the ap-
pliance door is closed.
¡ To remove particularly stubborn dirt, rub washing-up
liquid onto dirty areas on the smooth surfaces before
starting the cleaning aid.
1.
Remove any accessories from the cooking compart-
ment.
2.
ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
▶ Do not use distilled water.
Mix 0.4litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
3.
Press "Cleaning".
4.
Press "Easy Clean".
Loading ...
Loading ...
Loading ...