Loading ...
NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side cabinets.
3.24" (61 cm) minimum clearance between
the cooktop and the bottom of the cabinet
when the bottom of wood or metal cabinet
is protected by not less than Y4" (0.64 cm)
flame retardant milIboard covered with not
less than No. 28 MSG sheet metal,
0.01B"(0.4 ram) stainless steel, 0.024"(0.6
mm) aluminum, or 0.020" (0.5 ram) copper.
30" (762 cm) minimum clearance when
the cabinet is unprotected.
4. For cutouts below 22 7/8" (B8.1 cm),
appliance will slightly show out of the
cabinet.
B. Allow at least 19 Y4" (48.9 cm) clearance
for door depth when it is open.
Door Open
(see note 5)
<
21¾"
(55.25 cm
A
Side panel
Figure 1
*IMPORTANT: To avoid cooktop glass
breakage for cutout width ([ dimension) of more
than 301/16°°(76.4 cm), make sure the appliance is
centered in the counter opening while pushing
into it. Raise leveling legs at maximum position,
insert the appliance in the counter and then
level. Make sure the unit is supported
by the leveling legs not by the
cooktop glass itself.
22 7/8" (58.1cm) rain.
23 I/4" (59.05cm) max
(see Note 4)
- -€_
i
1 I/8"
_ (2,86 cm)
FRONT OF CABINET
__ F Ref,--------@
355/8" (90,5cm)- 30" (76,2 cm) 31 5/16" 28 5/16" (71,9cm) 30±1/16" 21 3/4" (55,2 cnl) Min 36 5/8" (93 c:m) Max
3(; 5/8" (9:3 cm) (795cm) (76,2±0,15cm) 22 1/8" (56,2 era) Max 35 5/8" (905cm) Min
24" (61 cm) Min with
backguard
2
Loading ...
Loading ...
Loading ...