Loading ...
Loading ...
Loading ...
English 9
Hazard levels
DANGER
● Indication of an imminent
threat of danger that will lead
to severe injuries or even
death.
몇 WARNING
● Indication of a potentially dan-
gerous situation that may lead
to severe injuries or even
death.
몇 CAUTION
● Indication of a potentially dan-
gerous situation that may lead
to minor injuries.
ATTENTION
● Indication of a potentially dan-
gerous situation that may lead
to damage to property.
Safety instructions
DANGER
● Risk of asphyxiation. Keep
packaging film out of the reach
of children.
● No changes may be made to
the device.
몇 WARNING
● The device is not intended for
use by children, persons with
restricted physical, sensory or
mental abilities or persons un-
familiar with these instructions.
Operators must be at least 16
years old. The age of the oper-
ator may be limited by local re-
strictions.
● Wear long trousers and sturdy
shoes when working with the
device. Do not work barefoot.
Do not wear sandals.
● Only operate the device on a
firm, level, non-slippery sur-
face.
● Keep the work area clear of
bystanders, children and ani-
mals while using the device.
● Do not use the device in the
dark.
Function
The carrying system consists of an adjustable, well-pad-
ded harness with wide straps that the user carries like a
backpack. The tool (hedge trimmer, pruner, telescopic
pole or another portable machine with a weight between
4.5 and 8 kg) is hooked into the carabiner of the steel
cable, which carries the weight of the tool and distrib-
utes it over the entire upper body. The spring tension
(preset) in the spring balancer reduces the perceptible
weight of the tool to no more than 3 kg. This allows you
to work quickly and safely with less strain.
Description of the device
Illustration A
1 Ball clamp
2 Steel cable
3 Carabiner
4 Clamping lever
5 Hip belt
6 Spring balance
7 Carrying rack
8 Backpack
9 Bar
Initial startup
Unpack the carrying system
1. Loosen both straps and remove the carrying system
from the transport bag.
Illustration B
Mounting the bracket
1. Remove the protective sleeve. Keep the protective
sleeve as it is required for transport.
2. Remove the ball clamp. Keep the ball clamp as it is
required for transport.
Illustration C
3. Push in the guide hose.
Illustration D
4. Push in the bracket up to the marking.
Illustration E
Loading ...
Loading ...
Loading ...