Loading ...
Loading ...
Loading ...
32 Menu operation
Network
Settings
Image
Resizing
Digital Shrink & Shift
Shrinks projected image digitally and shifts the image in available projection area.
• Digital Shrink: Press OK to activate the adjusting bar.
• Shift: Only available when shrink is applied.
Blanking
Blanks the chosen pixels from the selected sides.
Screen Fill
It provides 3 screen aspect ratios for user to choose from. The native resolution
will change according to users' selection.
• 16:9: Native resolution in Information page should show 1920x1080 accordingly.
• 4:3:
1. Native resolution in Information page should show 1400 x 1050 accordingly.
2. Projection of all aspect ratios should be limited in 1400 x 1050 range.
• 1:1:
1.Native resolution in Information page should show 1080 x 1080 accordingly.
2.Projection of all aspect ratios should be limited in 1080 x 1080 range.
Digital Lens
Shift
Adjusts the image position horizontally.
Fast Mode
Enables or disables the Fast Mode. Fast mode is a mode created for low latency.
• When Fast mode is activated, the system will automatically set Aspect Ratio/HV
Keystone/Corner Fit/Digital Zoom/Digital Shrink & Shift/Blanking/Overscan back
to default and gray out these items.
• When Fast mode is disabled, the system should recover the settings of Aspect
Ratio/HV Keystone/Corner Fit/Digital Zoom/Digital Shrink &
Shift/Blanking/Overscan to the status before Fast mode is activated.
Reset Display
Returns all of the adjustments you’ve made for the Display menu to the factory
preset values.
Wired LAN See Controlling the projector via LAN on page 24.
AMX Device
Discovery
When AMX Device Discovery is On, the projector can be detected by AMX
controller.
MAC Address
(Wired)
Displays the Mac Address for this projector.
Projector
Installation
See Choosing a location on page 12.
Remote
Receiver
Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Auto Source
Search
Allows the projector to automatically search for a signal.
Loading ...
Loading ...
Loading ...