Loading ...
Loading ...
Loading ...
24 Operation
Controlling the projector via LAN
Wired LAN allows you to manage the projector from a computer using a web browser when the
computer and the projector are properly connected to the same local area network.
Configuring the Wired LAN Settings
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the LAN input jack of the projector and the other end to
the RJ45 port.
2. Go to Advanced Menu - Network > Wired LAN. Press OK. The Wired LAN page appears.
3. Press to select DHCP and press / to select On.
4. Please wait for around 15 - 20 seconds, and then re-enter the Wired LAN page.
5. The IP Address, Subnet Mask, Default Gateway, and DNS Server settings will be displayed.
Note down the IP address displayed in the IP Address row.
6. Go back to Advanced Menu - Network > Wired LAN page.
7. Press to highlight AMX Device Discovery and press / to select On or Off. When AMX
Device Discovery is On, the projector can be detected by AMX controller.
If you are in a non-DHCP environment:
1. Go to Advanced Menu - Network > Wired LAN page.
2. Press to select DHCP and press / to select Off.
3. Contact your ITS administrator for information on the IP Address, Subnet Mask, Default
Gateway, and DNS Server settings.
4. Press to select the item you want to modify and press OK.
5. Press / to move the cursor and then press / to enter the value.
6. To save the setting, press OK. If you do not want to save the setting, press BACK.
7. Press to highlight Apply and press OK.
8. Go back to Advanced Menu - Network > Wired LAN page., press to highlight AMX
Device Discovery and press / to select On or Off.
9. Press MENU to exit the menu.
• When connecting the RJ45 cable, avoid coiling and intertwining the cable as it may cause signal noise or
interruption.
• If the IP Address still does not display, contact your ITS administrator.
Loading ...
Loading ...
Loading ...