Loading ...
Loading ...
Loading ...
27
By hand: Rinse all components and the container with hot
running water (at least 40°C), then immerse all the compo-
nents in hot tap water (at least 40°C) with a mild/neutral
washing-up liquid for at least 30 minutes. Rinse thoroughly
with hot tap water.
6. Make sure the air groove (in enlargement) is clean;
7. Reassemble all the lid components. To reinsert the con-
nector, press the corresponding button;
8. Attach the lid back on the milk container.
13. CLEANING THE INFUSER
Important!
The infuser cannot be extracted while the machine is on.
1. Press the
button to turn the machine o;
2. Remove the water tank;
3. Open the infuser door on the right side of the machine;
PUSH
4. Press the two coloured release buttons inwards, at the same
time pulling the infuser outwards;
PUSH
5. Soak the infuser in water for about 5 minutes, then rinse
under the tap;
Important!
RINSE WITH WATER ONLY
NO DETERGENTS NO DISHWASHER
6. Do not use detergents when cleaning the infuser, as they
could damage it.
7. Use the brush to remove any coee residues left in the
infuser housing, visible through the infuser door;
8. After cleaning, replace the infuser by sliding it onto the
internal support, then push the PUSH symbol fully in until
it clicks into place;
Please note:
If the infuser is dicult to insert, before insertion, adapt it to
the right position by pressing the two levers.
9. Once inserted, make sure the two coloured buttons have
snapped out;
PUSH
10. Close the infuser door;
11. Put the water tank back.
Loading ...
Loading ...
Loading ...