Loading ...
Loading ...
Loading ...
P a g e | 12
ONLINE: TRINITYAPPLIANCES.COM.AU
A (mm)
B (mm)
C (mm)
D
E
650
50 minimum
20 minimum
Air intake
Air exit 5 mm
Before you install the hob, make sure that:
the work surface is square and level and no structural members interfere with the space
requirements;
the work surface is made of a heat-resistant material;
if the hob is installed above an oven, the oven has a built-in cooling fan;
the installation will comply with all clearance requirements and applicable standards
and regulations;
a suitable isolating switch providing full disconnection from the main power supply is
incorporated in the permanent wiring, mounted and positioned to comply with the
local wiring rules and regulations. The isolation switch must be of an approved type and
provide a 3 mm air gap contact separation in all poles (or in all active [phase]
conductors if the local wiring rules allow for this variation of the requirements);
the isolating switch will be easily accessible to the customer with the hob installed;
you consult with the local building authorities and by-laws if in doubt regarding the
installation;
you use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall
surfaces surrounding the hob.
Loading ...
Loading ...
Loading ...