Loading ...
Loading ...
Loading ...
P a g e | 11
ONLINE: TRINITYAPPLIANCES.COM.AU
4. INSTALLATION
4.1 SELECTION OF INSTALLATION EQUIPMENT
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be preserved
around the hole.
Be sure the thickness of the work surface is at least 30 mm. Please select heat-resistant
work surface material to avoid larger deformation caused by the heat radiation from the
hotplate. As shown below:
L (mm)
W (mm)
H (mm)
D (mm)
A (mm)
B (mm)
X (mm)
900
510
47
43
880
490
50 minimum
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the
air inlet and outlet are not blocked. Ensure the ceramic cooker hob is in a good work
state. As shown below:
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least 650 mm.
Loading ...
Loading ...
Loading ...