Loading ...
Loading ...
Loading ...
15
CARE & MAINTENANCE (CONT.)
Clean the roller brush every 4–5 uses to avoid
blockage or jamming.
1. Turn the vacuum o. Detach the
vacuum head from the stick by
pressing the Vacuum Head Release
Button.
2. Press the Roller Brush Release
Button and pull out the roller brush
[Figure 3.8].
When the vacuum is not in use, store it on the
charging dock:
1. Mount the charging dock by screwing
it into the wall (see Charging the
Vacuum, page 10).
Cleaning the Roller Brush
Figure 3.8
Figure 4.1
Figure 3.9
3. Carefully use a pair of scissors or a
sharp knife to remove any hair or
debris tangled around the roller brush.
4. Insert the roller brush back into the
vacuum head. Slide the side panel up
to lock it in place [Figure 3.9].
STORAGE
Note:
• Always store the vacuum on flat ground.
If the vacuum is stored on a slanted
surface it may fall and be damaged.
• If storing for long periods of time,
periodically charge the battery to
preserve the life of the battery.
Disposing of the Battery
• The battery contains materials that are harmful
to the environment and must be removed
from the vacuum before it is discarded.
• When removing the battery, the vacuum must
be turned o.
• Discarded batteries should be handled
properly. Do not put batteries into fire, water,
or soil.
• If battery leakage touches skin or clothing,
flush with water immediately to avoid skin
injury and seek medical help.
2. Hang the
vacuum on the
charging dock
[Figure 4.1].
3. Place the nozzle
attachments in
the slots on the
charging dock.
Loading ...
Loading ...
Loading ...