Loading ...
Loading ...
Loading ...
10
CARE & MAINTENANCE
Battery Installation
Your vacuum uses a 2500mAh Li-ion
battery. On a full charge, the battery lasts
approximately 40 minutes on power level 1.
Use the included charger/charging dock to
charge the vacuum.
Charging the Vacuum
Note:
• To maintain the life of the battery, store
the vacuum in a cool, dry place.
• Store the battery in a semi-charged
state (at least half charged).
1. Turn the vacuum o. Press the Battery
Release Button and remove the battery.
2. To reinstall, slide the battery into the slot
in the vacuum body [Figure 2.1]. There
will be a clicking sound when the battery
is properly installed.
1. Insert the charger into the charging port
on the vacuum body [Figure 2.2].
Figure 2.1
Figure 2.2
Figure 2.3
Note: Make sure the vacuum is turned o
before charging.
Note: Charging time is about 4–5 hours.
2. Plug the charger into an outlet. The
battery indicator lights will blink while
charging [Figure 2.3].
3. When the vacuum is fully charged, the 3
battery indicator lights will turn solid and
turn o after 1 minute.
Loading ...
Loading ...
Loading ...