Loading ...
Loading ...
Loading ...
14
INSTALLATION
PLEASE READ ENTIRE INSTALLATION SECTION BEFORE STARTING
INSTALLATION. BE SURE THAT ONLY QUALIFIED PERSONNEL SHOULD
PERFORM THIS INSTALLATION.
__________________________________________________________________
BEFORE INSTALLATION
ELECTRIC SHOCK can be fatal
Turn the input power OFF and unplug the machine from the receptacle before working
on this equipment. Allow machine to sit for 5 minutes minimum to allow the power
capacitors to discharge before working inside this equipment.
Insulate yourself from the work and ground.
Always wear dry insulating gloves.
SELECT SUITABLE LOCATION
The Inverter will operate in harsh environments. Even so, it is important that simple preventative
measures are followed in order to assure long life and reliable operation.
The machine must be located where there is free circulation of clean air such that air movement
in the back and out the front will not be restricted.
Dirt and dust that can be drawn into the machine should be kept to a minimum. Failure to
observe these precautions can result in excessive operating temperatures and nuisance
shutdown.
STACKING
TIG200 cannot be stacked.
TILTING
Place the machine directly on a secure, level surface. The machine may topple over if this
procedure is not followed.
ENVIRONMENTAL AREA
Keep the machine dry. Do not place it on wet ground or in puddles. Avoid rainwater. Operating in
rain is not allowed.
Loading ...
Loading ...
Loading ...