Loading ...
Loading ...
Loading ...
66
4) Follow the on-screen instructions to pull the parking brake button and
wait for around 3 seconds until the parking brake is set. When the
operation is successfully completed, a “Completed successfully”
message will appear on the screen. Press “OK” to exit.
Parking Brake: Workshop Mode
This service is used to activate and deactivate the so-called installation
position for the Automatic Hold brake. In this mode the parking brake is
moved into the opened position and temporarily deactivated for personal
protection.
The installation position must be activated for the following repairs:
Replacement of brake pads.
Replacement of a brake caliper.
Replacement of an actuator.
Select Parking Brake: Workshop Mode and follow the on-screen
instructions to perform a series of operations to start the brake pad after
replacement.
When the operation is successfully completed, a “Completed successfully”
message will appear on the screen. Press OK to exit.
Figure 7-8 Sample EMF Start-up Screen 3
Loading ...
Loading ...
Loading ...