Loading ...
Loading ...
Loading ...
30
3. Tap the Data Logging button again to end recording. A submission
form will display for inputting of report information.
4. Tap the Send button to submit the report form via the Internet. A
confirmation message displays when the report has been
successfully sent.
Status Information Bar
The Status Information Bar at the top of the Main Section displays the
following items:
1. Menu Title – displays the menu heading of the Main Section.
2. Voltage Icon – displays the vehicle’s voltage status.
Main Section
The Main Section of the screen varies depending on the stage of operations.
The Main Section can display vehicle identification selections, the main menu,
test data, messages, instructions and other information. In this case, it shows
the two modes IMMO provides: Smart Mode and Expert Mode.
Functional Buttons
The displayed Functional Buttons vary depending on the stage of operations.
Functional buttons can be used to navigate menus, to save or clear data, to
exit scanning and to perform a number of other control functions. The use of
these buttons will be discussed in detail in the following sections of the
corresponding test operations.
Screen Messages
Screen messages appear when additional input is needed before proceeding.
There are three main types of on-screen messages: Confirmation, Warning,
and Error.
Confirmation Messages
This type of messages usually displays as an “Information” screen to inform
the user that a selected action cannot be reversed or when an action has
been initiated and confirmation is needed to continue.
Loading ...
Loading ...
Loading ...