Loading ...
Loading ...
Loading ...
7.5 AMP IMPACT WRENCH 9
OPERATING INSTRUCTIONS
1. Installing and Removing
the Socket
WARNING: Always verify that the
tool is switched off and unplugged before
installing any accessories on the tool.
Always use the correct size socket for
bolts and nuts. An incorrect socket
will result in inaccurate and inconsis-
tent fastening torque and/or damage
to the bolt or nut.
a. To install the socket, push it onto
the 1/2-inch square drive of the
tool until it locks into place.
b. To remove the socket, simply pull it off.
2. Turning The Impact Wrench On
a. Connect the power cord of your
impact wrench to a standard
household power outlet.
b. Press the part of the switch
marked “F” to run the tool in
the forward direction (clockwise
rotation). Use this direction for
tightening bolts or nuts.
c. Press the part of the switch
marked “R” to reverse the motor
direction (counter-clockwise
rotation). Use this direction for
loosening bolts or nuts.
d. Release the switch to stop the tool.
e. Keep the switch pressed for continuous operation.
1
SOCKET
1/2-INCH
SQUARE DRIVE
2
SWITCH
Loading ...
Loading ...
Loading ...