Loading ...
Loading ...
Loading ...
10 7.5 AMP IMPACT WRENCH
OPERATING INSTRUCTIONS
3. Installing Fasteners
NOTICE: Always keep the impact wrench at a right angle to the fastener to avoid
damaging the fastener head.
TO FASTEN:
a. Start threading the fastener by hand onto or into its threaded counterpart (e.g., nut
onto bolt, or bolt into nut or threaded hole).
b. With the proper impact socket securely mounted to the wrench, slide the impact
socket onto the nut or bolt head.
c. Firmly hold the tool and depress the switch at “F”. The impact socket will turn the
fastener and impacting will begin once the fastener encounters resistance.
WARNING: Do not over-tighten, as the force of the impact wrench can break the
fastener and cause injury.
TO LOOSEN:
a. With the proper impact socket securely mounted to the wrench, slide the impact
socket onto the bolt head.
b. Firmly hold the tool and depress the switch at “R”. The tool will start to impact
immediately.
c. Once the fastener has "broken loose", it will start to unthread. Be careful that you
do not allow a fastener to spin freely once it is no longer engaged with its threaded
counterpart, as it may be thrown out of the socket.
Loading ...
Loading ...
Loading ...