Loading ...
Loading ...
Loading ...
7
• Using a phillips screwdriver, insert the
guard screw and tighten securely as
shown in Figure E to complete the guard
assembly.
• Once the guard is installed, remove
the covering from the line cut-off blade,
located on the edge of the guard
• Push the handle completely onto the
housing and position it slightly until it
“snaps” into place.
• To adjust the handle up or down, press
in on the button (22) and raise or lower
the handle (figure H).
• The handle should be adjusted so that
your front arm is straight when the
trimmer is in the working position.
ATTACHING THE AUXILIARY
HANDLE
To attach the handle, press in on the buttons
(21) on both sides of the upper housing as
shown in figure F.
HEIGHT ADJUSTMENT
CAUTION: Adjust the length of the
trimmer to obtain proper working positions
shown in figures J - J3.
• The overall height of the trimmer can be
adjusted by loosening the height-adjust
collar (7) by rotating it in the direction of
the arrow shown in figure I.
• Move the upper housing straight up or
down. When the desired height is achieved,
tighten the collar by rotating it opposite of
the direction shown in figure I.
• Position the handle as shown in figure
G (with the BLACK+DECKER logo facing
upward). Partially push the handle on
so it will hold the buttons in when you
release them with your hand.
RELEASING THE CUTTING LINE
In transit, the cutting line is taped to the
spool housing.
G
D
11
19
20
17
16
18
15
E
F
21
H
22
I
7
Loading ...
Loading ...
Loading ...