Loading ...
Loading ...
Loading ...
en Appliance door
20
Refitting the shelf supports
The shelf supports are designed to fit on either the right-
or the left-hand side (not both).For each of the shelf
supports, make sure that the hooks at the back are at
the top.
1. First, push the shelf support into the middle of the
rear socket ‚ until the shelf support rests against the
cooking compartment wall, and then push it back ƒ
(fig. !).
2. Then push the shelf support into the front socket „
until the shelf support also rests against the cooking
compartment wall, and then press it downwards …
(fig. ").
qAppliance door
Ap p l i a n c e door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Main oven – Fitting and removing the glass
panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Locking the appliance door
1. Open the appliance door fully.
2. Open the two locking levers on the left and right
(fig. !).
3. Close the appliance door as far as it goes (fig. ").
Removing panels
1. Open the appliance door slightly.
2. Press the left- and right-hand sides of the cover
(fig.°!).
3. Remove the cover (fig. ").
4. Lift out the outer panel (fig. #) and set it down
carefully on a flat surface.
5. Lift out the inner panel (fig. $) and set it down
carefully on a flat surface.
G
F
2
E
D
1
2
1
2
1
g
Loading ...
Loading ...
Loading ...