Loading ...
Loading ...
Loading ...
Your mower is
shipped with the
handle in the higher
height position.
Each end ofthe
lower handle must
be placed inthe
same position onthe
mounting brackets.
IMPORTANT:This
unit isshippedwithout
gasolineoroil inthe
engine. Fill upgasoline
and oilas instructedin
theaccompanyingen-
ginemanual BEFORE
operatingyour mower.
NOTE: This Operator's
Manualcovers
severalmodels.Lawn
Mowerfeatures vary by
model.Notallfeatures
discussed(or engines
pictured)in this manual
are applicableto all
LawnMower models.
ol It
Figure 3=1
1. For shippingpurposes,the chute deflectoron
your mowerisheld in an uprightposition bya
retainer.Removethe retainer asfollows:
a. Push chutedeflector uptowardsengine.
Holdingdeflectorinthis position,remove
the retainerand discard. See Figure3-1.
b. Lowerthechute deflectorcarefullykeeping
yourfingers out of theway.
2. Performthe following sequencefor handle
setup:
a. Lift the upperhandle upfromfolded
positionA and pull itto extendedposition
B following thearrow in Figure3-2.The
handleshouldclick intothis position.
b. Makesure thecarriage boltis seated
properlyin the handle.Tightenwing nuts
securing upper handleto the lower handle.
3. If satisfiedwith heightof handle,tightenwing
nutsat the ends of the lowerhandleshown in
Figure3-3. Forconvenienceof operating,you
mayadjust thehandle heightasfollows:
a. Removethewing nutsshownin Figure3-3
and removethe lowerhandle.
,
b. Positioneach handlebracketstud intothe
top hole in the lower handle.
c. Tightenthewing nuts.
Positionthe recoil starterby following the
stepsbelow:
a. Hold theblade controlagainstthe upper
handle.
Figure 3=2
Figure 3=3
6
Loading ...
Loading ...
Loading ...