Loading ...
Loading ...
Loading ...
EN - 11
Mechanical transmission
1st gear (see 4.12).
-
4.11).
The pedal has to be re-
-
and the driver to lose control.
the throttle and gear lever. To change gear,
IMPORTANT
engaged when the machine has stopped.
Press the drive pedal (see 4.22) in direction
-
Drive must be engaged
as described below (see 4.22) to prevent
sudden engagement from causing tipping
up and loss of control of the vehicle, par-
5.4.3 Braking
Mechanical transmission
-
ing the accelerator so as not to overload the
-
-
chine until it stops.
-
5.4.4
IMPORTANT
when the machine has stopped.
IMPORTANT To proceed in reverse gear with
press and hold the consent pedal down (see 4.7)
so as not to cause the engine to stop.
Mechanical transmission
-
in the «R» direction (see 4.22).
5.4.5 Grass cutting
To start cutting:
-
est position;
IMPORTANT If the cutting means are
engaged when the grass is too high, the
engine could suffer a sudden drop of r.p.m.
worn.
described;
– regulate the cutting height and speed (see
grass).
Mechanical transmission
1st gear
NOTE The fourth gear is just a transfer
gear to be used on the flat.
Loading ...
Loading ...
Loading ...