Loading ...
Loading ...
Loading ...
L - Oil Level Gauge
While set up the unit, smoke oil need to be into the unit, do not exceed the MAX line.
Check and conm proper oil level periodically. If the oil level is lower than the MIN line,the unit
would need a re
Leak Status Indicaon
No Leak Small Leak Massive Leak
Generic Operaon
1. Turn OFF the ignion of the vehicle.
LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF.
2. Dismantle the air ter and the throle connecons.
3. Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake
Adapter into the opening.
4. Connect the Power Cord to 12V vehicle baery.
5. Now the Power LED would be ON, if else check the power supply.
6. Introduce the smoke nozzle into the system via the Adapter Cone.
7. Press Air Control Switch, wait for 30 seconds un the system is pressurized, and chec
k the
Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge
& Flow Meter.
9. Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone
Adapter when there’s obvious smoke coming out of the smoke nozzle.
10. The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp
to assist.
11. Aer test, press Smoke Control Switch again to stop the unit from generag smoke and
press Air Cont
rol Switch to stop generag pressurized air.
12. Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit
or make it stand in UPRIGHT posion only. Do NOT lay it down.
Warranty
1. The main unit entled free warranty since the date of purchasing up to 12 months.
2. All accessories entled free warranty since the date of purchasing up to 6 months, except the
Intake Bladders.
3. Any damage to the machine caused by misuse, or improper operaon, is no
t covered by
warranty.