Loading ...
Loading ...
Accessories Explanaon
Power Cord
To oer connecon from the unit to the automobile baery, in order to drive the unit.
Smoke Delivery Hose
For introducon of smoke from the unit to Adapter Cone / Universal Intake Bladder or to the
vacuum pipe directly.
Funnel
Assistance method for smoke oil re, to prevent pour oil to the unit surface.
Intake Bladder
To t the intake and exhaust, seal the system and introduce smoke into the system. Especially
while the inlet posion is not rounded-shape.
1. Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed, so as
not to scratch the adapter.
2. Close the Pressure Relief Valve(A) next to the Hand Pump(B).
3. Put the Rubber Component(C) into the intake opening.
4. Inflate the Rubber Component(C) by pressing the Hand Pump(B)
till the intake opening is tightly sealed.
5. Now the system is ready to test, introduce air/smoke into the
system by plug the smoke nozzle into the Tube Opening(D) .
6. After test,pull off the smoke nozzle, release the inflated air by open the Pressure Relief Valve(A) next to the
Hand Pump(B).
7. Clean the adapter for storage, avoid c
ontact with corrosive liquids.
Intake Bladder Replacement Rubber
The rubber on the Intake Bladder may be easily broken, if not operate it properly with cauon.
The rubber could be replaced with new one without replace the whole Intake Bladder.
Adapter Cone
To t the intake and exhaust, seal the system and introduce smoke into the system. It may fall out
at high pressure and need a second hand to push and hold at operaon.
Product Structure
The following list is designed to familiarize you with the funcon of the operaonal components
of the machine.
A - Oil Refill Port
For oil re while its needed. The funnel is a nice helper to prevent oil from poured to the surface
of the unit.
B - Velcro Strap
For collecon of the smoke delivery hose, and power cord before storage.
Loading ...
Loading ...