Loading ...
Loading ...
Loading ...
PAGE: 8 / 12
The slide switch on switch box sets direction of fan rotation. Select the desired direction of fan rotation.
Push the slide switch down for "Forward" and up for "Reverse".
Note: Wait for fan to stop before reversing the direction of blade rotation.
Slide Switch
Reverse
Forward
Fig.21-a Fig.21-b
Slide Switch
Switch Box
Reverse
Forward
End Cap
Finial
Rubber Washer
Metal Washer
Hex Nut
Glass Shade
Fig.20
Remove the switch box cover screws
from the switch box cover first.
Carefully put the wires into the fan
fixture set, then attach the fan light
into the fan fixture set with the switch
box screws.
Install LED bulbs (included).
WARNING: Do not press dimmable
button of remote control when
using compact fluorescent bulbs
(CFL) and non-dimmable LED bulbs.
Install fan light (Provided with package)
Connect wires:
The white (neutral) wire from the fan
light to white (neutral) wire from fan
fixture set with a wire connector.
The black (hot) wire from fan light to
blue (hot) wire from fan fixture set with
a wire connector.
Fan Light
Fan Fixture
Set
Fig.17
2-9W E26 A19 LED
Bulbs (included)
E26 A19 bulbs Max.60W
Fig.19Fig.18
Switch Box
Screw
Fan Light
WARNING:
This fan light has a built-in current limiting device in the receiver of remote control to conserve energy. The fan light
Install fan light
Threaded Pipe
Remove the finial, end cap, hex nut, metal washer and rubber washer
from threaded pipe first. Install the glass shade, rubber washer and metal
washer upward through the threaded pipe and secure with hex nut. Then
attach the end cap to the glass shade and secure it with finial.
will shuts off shortly if the combined wattage of the installed bulbs exceeds 190Watts. Please replace light bulbs
with lower wattage bulbs which show on relamping label or package and then turn on the fan light again.
220104
Loading ...
Loading ...
Loading ...