Makita XRH07ZKUN INSTRUCTION MANUAL

Loading ...

9 ENGLISH

CAUTION: Use the side handle only when

chipping, scaling or demolishing. Do not use it

when drilling in concrete, masonry, etc. The tool

cannotbeheldproperlywiththissidehandlewhen

drilling.

►1. Side handle 2. Clamp nut

The side handle can be swung 360° on the vertical

andsecuredatanydesiredposition.Italsosecures

at eight different positions back and forth on the hori-

zontal. Loosen the clamp nut to swing the side handle

to a desired position, and then tighten the clamp nut

securely.

Side grip (auxiliary handle)

CAUTION: Always use the side grip to ensure

safe operation.

CAUTION: After installing or adjusting the

side grip, make sure that the side grip is rmly

secured.

The side grip swings around to either side, allowing

easyhandlingofthetoolinanyposition.Loosenthe

sidegripbyturningitcounterclockwise,swingittothe

desiredpositionandthentightenitbyturningclockwise.

►1. Side grip

Grease

Coat the shank end of the drill bit beforehand with a

small amount of grease (about 0.5 - 1 g).

This chuck lubrication assures smooth action and lon-

ger service life.

Installing or removing drill bit

Cleantheshankendofthedrillbitandapplygrease

before installing the drill bit.

►1. Shank end 2. Grease

Insert the drill bit into the tool. Turn the drill bit and push

it in until it engages.

Afterinstallingthedrillbit,alwaysmakesurethatthe

drillbitissecurelyheldinplacebytryingtopullitout.

►1. Drill bit

To remove the drill bit, pull the chuck cover down all the

wayandpullthedrillbitout.

►1. Drill bit 2. Chuck cover

Loading ...

Makita XRH07ZKUN 36V 18V X2 LXT Brushless 1‑9/16" Advanced AVT Rotary Hammer, SDS‑MAX, AFT, AWS, Tool Only