Makita XRH07ZKUN INSTRUCTION MANUAL

Loading ...

16 ENGLISH

NOTE:Thewirelessactivationlampsnishblinking

in green after 20 seconds elapsed. Press the wireless

activation button on the tool while the wireless acti-

vation lamp on the cleaner is blinking. If the wireless

activation lamp does not blink in green, push the wire-

lessactivationbuttonbrieyandholditdownagain.

NOTE: When performing two or more tool registra-

tionsforonevacuumcleaner,nishthetoolregistra-

tiononebyone.

Starting the wireless activation

function

NOTE: Finish the tool registration for the vacuum

cleaner prior to the wireless activation.

NOTE: Refer to the instruction manual of the vacuum

cleaner, too.

After registering a tool to the vacuum cleaner, the

vacuumcleanerwillautomaticallyrunsalongwiththe

switch operation of the tool.

1. Install the wireless unit to the tool.

2. Connect the hose of the vacuum cleaner with the

tool.

3. Setthestand-byswitchonthevacuumcleanerto

"AUTO".

►1.Stand-byswitch

4. Push the wireless activation button on the tool

briey.Thewirelessactivationlampwillblinkinblue.

►1. Wireless activation button 2. Wireless activation

lamp

5. Pull the switch trigger of the tool. Check if the

vacuum cleaner runs while the switch trigger is being

pulled.

To stop the wireless activation of the vacuum cleaner,

push the wireless activation button on the tool.

NOTE: The wireless activation lamp on the tool will

stop blinking in blue when there is no operation for

2hours.Inthiscase,setthestand-byswitchonthe

vacuum cleaner to "AUTO" and push the wireless

activation button on the tool again.

NOTE:Thevacuumcleanerstarts/stopswithadelay.

There is a time lag when the vacuum cleaner detects

a switch operation of the tool.

NOTE: The transmission distance of the wireless unit

mayvarydependingonthelocationandsurrounding

circumstances.

NOTE: When two or more tools are registered to one

vacuumcleaner,thevacuumcleanermaystartrun-

ningevenifyoudon'tpulltheswitchtriggerbecause

an other user is using the wireless activation function.

Loading ...

Makita XRH07ZKUN 36V 18V X2 LXT Brushless 1‑9/16" Advanced AVT Rotary Hammer, SDS‑MAX, AFT, AWS, Tool Only

INSTRUCTION MANUAL - Page 16