Loading ...
Loading ...
Loading ...
You may use a hose with an inner diameter of 12mm for continuous drainage:
● Remove the plug from the drain hole at the bottom of the water tank. Keep
the plug for future use.
● Fit the hose rmly on the drain connector. The hose must lead to an
appropriate drain at a downward slope with no sharp bends.
NOTE:
● Ensure the water tank is fully installed in position before inserting the hose
and before running the appliance.
● Before removing the water tank, ensure that the hose is disconnected.
EMPTYING THE WATER TANK
MAINTENANCE
CONTINUOUS DRAINAGE OPTION
1. When the water tank is full, the “FULL” LED illuminates and the unit will stop running in a few
minutes.
2. Do not move the unit or remove the water tank if the unit is still operating, as water may leak,
damage the unit or cause an electric shock.
3. To remove the water tank, pull it out gently by gripping the bottom of the water tank and lift
carefully.
4. Remove the cover of water tank rst, then pour the water away, clean the water tank and restore
the cover and the water tank to the correct position.
Pull water tank out
Lift by the handle
Lift open a corner of
the water tank cover
Pour the water away
Ret the cover and restore
the water tank into position
Loading ...
Loading ...
Loading ...