Loading ...
Loading ...
Loading ...
Steam Iron | 7
Operating Instructions
Dry Ironing
1. Set the Steam Control Lever to " ".
2. Adjust ironing temperature in accordance with the fabric's requirement.
3. The light "FLASH" indicates that the iron's temperature is increasing steadily. Once
desired temperature is reached, the light will turn "ON" automatically.
Filling with Water
Before filling the water tank, make sure that the iron is unplugged, Thermostat dial is
positioned at "0", and the iron is held at approximately 45° tilt. Now, fill the water tank untill
it reaches MAX level.
Water Mist
You can use the spraying option by repeatedly pressing the Spray Mist button.
Make sure that your iron's water tank is full.
Steam Ironing
1. Fill the water tank in accordance with the instructions
in the "Filling with Water" section.
2. Plug the cord into the outlet.
3. The red light flashes, which indicates that the iron's
temperature is increasing steadily.
Once desired temperature is reached, the light will turn
"ON" automatically.
4. Adjust the Steam Adjustable Control Lever by turning
right for more steam and left for less steam.
5. To achieve best steam discharge, make sure that the
Thermostat dial is set at the MAX level.
NOTE: There is no steam when you set the Thermostat
dial at 1 or 2.
Steam Adjustable
Control Level
NOTE: The power indicator light working mechanism is as follows:
1. Red light flashes when power on until temperature is reached.
2. Green light turns on when temperature is reached.
3. Green light flashes when auto shut-off mode starts. (No action for 30s flatwise or
15min upright. You have to move the iron back and forth on the line to auto-restart.
The light will immediately stop flashing after achieving sufficient temperature to
continue ironing.)
Loading ...
Loading ...
Loading ...