Loading ...
Loading ...
Loading ...
Steam Iron | 10
Self- Cleaning
If the water in your area is hard (contains excessive dissolved mineral), self-cleaning should
be done every two weeks.
1. Your iron should be unplugged before self-cleaning.
2. Using the Steam control lever, set the steam level to " ".
3. Fill the water tank to the MAX level. Do not add any cleaning solutions Inside the water
tank.
4. Before plugging in your iron make sure that the thermostat dial is set to MAX. Now
allow the iron to heat up.
5. Green light will turn on once the iron reaches its optimal working temperature.
6. Once the green light turns on, turn the thermostat dial to “0” and disconnect the iron
from the power line.
7. Firmly hold the iron over the sink and press/hold the self- cleaning button for several
seconds.
8. Shake the iron back and forth while pressing the self-cleaning button. Steam and boiling
water will expel along with impurities and other contaminants.
9. CAUTION! Avoid any contact with the iron during the cleaning process and firmly hold
it above the sink to prevent any burns.
10. You can repeat the self-cleaning process if there are still some leftover impurities.
11. Dry up the soleplate by plugging the iron into the outlet. It will heat up the soleplate
and evaporate water droplets.
12. Disconnect the iron from the power outlet once it reaches the required temperature.
13. Before storing, make sure the iron cools down completely. Then carefully remove any
water stains with a piece of dry cloth.
Before you begin cleaning, unplug the iron and allow it to cool down.
1. Clean the soleplate with any moist cloth and non-abrasive cleaner.
2. If fibers stick to the soleplate, use damp cloth immersed in vinegar to wipe off adherent
fibers.
3. Never use strong acids or cleaning solutions when cleaning soleplate.
4. Remove any left over water from the water tank.
5. Make sure the steam control lever is set to " " and the thermostat dial is set to "0" before
cleaning or storage.
Cleaning & Maintenance
Self-Clean
Button
Loading ...
Loading ...
Loading ...